Most operations know the aluminum piling up on their floor has value. What trips them up is the sorting.
A facilities manager in Roseville recently asked why his last load brought in less than expected. The answer was simple: cast aluminum housings had gotten mixed with clean sheet cutoffs. The whole load got downgraded.
That's how it works. Recyclers evaluate aluminum by grade, alloy type, and contamination level. When different types get combined, the entire load typically gets assessed at the lowest-grade material present. Your clean extrusions become worth what the dirty castings are worth.
This guide covers the aluminum scrap types Northern California businesses commonly generate and provides a straightforward system for keeping them separate.
Why Separation Directly Affects Your Evaluation
Here's the reality: a well-sorted aluminum load and a mixed jumble of the same material can evaluate very differently.
Three factors drive this:
Grade determines processing requirements. Clean, sorted aluminum can move through recycling channels efficiently. Mixed loads require additional sorting, testing, and handling before they can be processed.
Alloy mixing creates complications. Different aluminum alloys have different compositions. When they get melted together without separation, the resulting material may not meet specifications for any particular application. That uncertainty gets reflected in how the load is evaluated.
Contamination adds processing steps. Paint, oil, plastic attachments, and other non-aluminum materials all require removal. The more contamination present, the more work required before the aluminum can be recycled.
Beyond evaluation, proper separation affects pickup logistics. A load that's already organized requires less processing time on our end, which can factor into scheduling flexibility and service arrangements.

The Five Aluminum Categories Most California Businesses Generate
Different industries produce different aluminum streams. Knowing what you're working with is the first step toward effective separation.
Extruded Aluminum
Manufacturing facilities and construction operations commonly generate extruded aluminum. You'll recognize it by its consistent cross-section—the same shape running the full length of the piece.
Common sources include:
Window and door frames
Structural framing components
Heat sink assemblies
Architectural trim pieces
Railing sections and posts
Extruded aluminum typically maintains consistent alloy composition within a single source, which makes it relatively straightforward to keep separate. The challenge comes when multiple extrusion sources get combined without tracking alloy differences.
Separation tip: If you work with extrusions from different suppliers or for different applications, keep them in separate containers. Material from the same project or supplier usually shares alloy composition.
Sheet and Plate Aluminum
Fabrication shops, HVAC contractors, and manufacturing operations frequently work with aluminum sheet and plate. This flat-rolled material shows up in various thicknesses and finishes.
Common sources include:
Roofing and siding cutoffs
Ductwork fabrication scrap
Signage material remnants
Industrial panel waste
Enclosure and housing cutoffs
Sheet scrap often arrives with coatings, paint, or protective films. Bare, unpainted sheet aluminum evaluates differently than coated material—they should go in separate containers.
What many operations miss: That protective plastic film on new sheet stock counts as contamination if left on. Peel it before adding to your clean aluminum bin.
Cast Aluminum
Auto shops, equipment repair facilities, and manufacturing operations handling cast components see this category regularly. Cast aluminum has a distinctly different texture and appearance than wrought aluminum products—often rougher, with visible mold marks or complex shapes.
Common sources include:
Engine blocks and cylinder heads
Transmission housings
Industrial equipment castings
Pump and valve bodies
Machinery covers and brackets
Cast aluminum contains different alloy compositions than wrought aluminum products. The silicon content in most casting alloys, for example, differs significantly from extrusion alloys.
Critical point: Mixing cast with sheet or extruded material creates evaluation complications that work against you. Keep cast aluminum completely separate from wrought products.
Aluminum Wire and Cable
Electrical contractors, demolition operations, and facilities undergoing equipment upgrades generate aluminum conductor material.
This includes:
Building wire (both insulated and bare)
Power cable
Bus bar and conductor assemblies
Service entrance cables
Insulated aluminum wire requires different handling than bare aluminum. The insulation percentage affects how recyclers evaluate the material.
Best practice: Keep insulated wire separate from bare aluminum. If you have significant volumes of insulated wire, keeping different insulation types separate (THHN vs. service cable, for example) can be worthwhile.
Mixed and Lower-Grade Aluminum
Some aluminum scrap doesn't fit neatly into premium categories:
Aluminum cans (typically processed through different channels)
Foil and thin-gauge material
Heavily oxidized or contaminated pieces
Items with mixed metal attachments (steel screws, brass fittings)
Painted or coated material that can't be easily cleaned
Recognizing that this category exists helps you keep it separate from higher-grade material. One piece of aluminum with steel attachments tossed into your clean extrusion bin can affect how that entire container gets evaluated.

Setting Up a Practical Separation System
Effective aluminum separation doesn't require elaborate infrastructure. It requires clear categories, consistent practices, and containers positioned where your people actually work.
Step 1: Track What You Actually Generate
Before buying bins, spend a week observing what aluminum your operation produces. Note:
What types appear most frequently
Where in your facility they originate
Rough volume estimates
Contamination issues you observe
This prevents setting up containers for material you rarely see while neglecting categories you generate constantly.
Step 2: Establish Your Categories
For most Northern California commercial operations, four to six separation categories work well:
Category 1: Clean Extrusion/SheetUnpainted, uncoated, single-alloy material. Your highest-value stream in most cases. No attachments, no oil, no coatings.
Category 2: Coated or Painted AluminumSheet, extrusion, or plate with surface treatments. Still recyclable, but evaluated differently than bare material.
Category 3: Cast AluminumEngine parts, housings, castings. Keep completely separate from wrought aluminum products.
Category 4: Aluminum WireBoth insulated and bare. Keeping these separate from each other provides additional benefit if volumes justify it.
Category 5: Mixed/Low-GradeEverything that doesn't fit the above categories or shows significant contamination.
Adjust based on your specific operation. A machine shop working with multiple alloy specifications might need finer distinctions. A construction operation with lower volumes might combine categories 1 and 2.
Step 3: Position Containers at Generation Points
The best separation system fails if workers have to carry material across the facility to sort it.
Place collection containers where aluminum scrap actually gets generated:
Near cutting and fabrication stations
At demolition staging areas
Adjacent to maintenance workbenches
In receiving areas where packaging gets broken down
Label containers clearly. "Clean Aluminum Sheet—No Paint" works better than "6061-T6" for production staff who may not recognize alloy designations.
Step 4: Brief Your Team
A five-minute conversation with the people actually handling material makes the difference between a system that works and one that gets ignored.
Cover the basics:
Why separation matters (the evaluation impact)
What goes in each container
What to do with questionable items
Who to ask when uncertain
Keep it practical. Most workers will follow a simple system that makes sense to them.
California-Specific Considerations for Outdoor Scrap Storage
If you store aluminum scrap outdoors—which many Central Valley and Sacramento-area facilities do—California's environmental regulations create specific requirements.
Storm Water Pollution Prevention Plans (SWPPP): Commercial and industrial facilities in California that store materials outdoors often need to address scrap metal storage in their storm water management plans. Uncovered scrap metal exposed to rain can create runoff issues that trigger compliance problems.
Practical approaches:
Store aluminum under cover when possible
Use containers with drainage that routes to appropriate collection
Keep oily or contaminated material contained separately
Document your storage practices
Heat and oxidation: The Central Valley's summer heat accelerates oxidation on exposed aluminum. Oxidized material is still recyclable, but heavy oxidation affects how it's categorized. Covered storage preserves material quality.
If you're uncertain about compliance requirements for your specific facility, your local Regional Water Quality Control Board can clarify what applies to your operation. For questions about how material condition affects evaluation, that's something to discuss when scheduling a pickup.
Common Separation Mistakes That Cost Operations Money
Even well-intentioned programs run into predictable problems. Watch for these:
Mixing Alloys That Look Identical
6061 and 6063 aluminum extrusions look nearly identical but have different compositions. Professional recyclers use XRF (X-ray fluorescence) analyzers to determine exact composition—a capability most generators don't have.
The practical solution: Mark material at the source, before it becomes scrap. If you know a batch of extrusions is 6063 from the mill cert, label the scrap container accordingly.
Ignoring Attachments and Fasteners
Aluminum with steel screws, rubber gaskets, or plastic components requires more processing than clean material.
When practical, remove attachments before placing aluminum in collection containers. When not practical, keep attached material separate from clean scrap.
Letting Containers Overflow
Overflowing bins lead to floor piles. Floor piles lead to mixing.
Empty containers before they reach capacity, even if that means scheduling pickups more frequently than originally planned.
Failing to Protect Material from Contamination
Oil, coolant, and other industrial fluids contaminate aluminum. Keep fluid-handling operations away from scrap collection areas.
Aluminum stored outdoors without cover accumulates dirt and debris that affects evaluation. Indoor storage, or at minimum covered outdoor storage, preserves material quality.
What "Clean" Actually Means
Recyclers use the term "clean" frequently, but its meaning isn't always obvious.
Clean aluminum means:
Free from non-aluminum attachments (or minimal attachments)
Not contaminated with oil, paint, heavy coatings, or debris
Single alloy type or compatible alloy group
Properly sorted and not mixed with other metals
This doesn't mean laboratory-grade purity. It means taking reasonable steps to prevent obvious contamination and mixing.
You don't need to scrub every piece. You do need to keep oily material out of clean bins, remove obvious steel fasteners when practical, and protect stored material from weather and debris.

Figuring Out Your Pickup Timing
How often should you schedule aluminum pickups? Several factors influence this:
Available storage space: If material accumulates faster than your storage can handle, more frequent pickups make sense regardless of other considerations.
Volume thresholds: There are typically minimum quantities that make pickup logistics practical. Call (916) 271-2691 to discuss what works for your specific situation and location.
Material preservation: Aluminum stored too long outdoors, especially in contaminating environments, loses condition. Regular pickups prevent degradation.
Operational rhythm: Some facilities prefer regular scheduled pickups aligned with production cycles. Others prefer on-demand service when material reaches a target level.
When Elaborate Sorting Isn't Worth the Effort
Not every operation benefits from a complex sorting program. Consider a simpler approach if:
Your aluminum volumes are low (occasional small quantities rather than regular generation)
You lack space for multiple collection containers
Staff time spent sorting exceeds the marginal value improvement
You generate only one or two aluminum types anyway
In these cases, basic separation—keeping aluminum separate from other metals, keeping clean material away from contaminated—may be sufficient.
Discuss your specific situation when scheduling a pickup to determine what level of separation makes practical sense for your operation.
Preparing for an Evaluation
When a recycler arrives to evaluate your aluminum scrap, a few practices help the process go smoothly:
Have material accessible. Scrap buried behind equipment or scattered across multiple locations adds time and complications.
Know approximately what you have. Being able to say "about two dozen HVAC units with aluminum components and three pallets of sheet cutoffs" helps set appropriate expectations.
Have questions ready. If you're uncertain about specific items or want clarification on how something was categorized, the evaluation visit is the time to ask.
Be straightforward about mixed loads. If your material is heavily mixed or contaminated, acknowledging that upfront leads to better outcomes than surprises during evaluation.
The Willis Recycling Approach
Willis Recycling provides mobile recycling services for commercial operations throughout the Sacramento region and Northern California. For businesses generating aluminum scrap alongside other materials, on-site pickup eliminates the logistics of transporting material to a facility.
The evaluation process happens at your location. Our team assesses material type, condition, and quantity, then provides transparent documentation of the evaluation.
For operations with questions about aluminum separation, material identification, or pickup logistics, a phone conversation often clarifies what approach makes sense for your specific situation.
Frequently Asked Questions
What happens if I accidentally mix different aluminum types together?
Mixed aluminum gets evaluated as lower-grade material since separating alloys after mixing isn't practical during standard processing. If you discover mixing before pickup, separating what you can still improves outcomes for the remaining sorted material. Going forward, clearer container labeling and positioning often prevents recurring mixing issues.
How do I identify different aluminum alloys in my scrap pile?
Visual identification of specific alloys is difficult without testing equipment like XRF analyzers. Focus on separating by application type: keep extrusions with extrusions, castings with castings, sheet with sheet. Material from the same original source usually shares alloy composition. When purchasing new aluminum stock, retaining mill certifications helps track alloys through to scrap stage.
Does aluminum need to be completely clean to have value?
No. Some contamination or coating presence is expected and gets factored into evaluation. The goal is minimizing avoidable contamination rather than achieving laboratory purity. Removing obvious debris, draining fluids, and keeping material protected from weather all help without requiring intensive cleaning efforts.
What minimum quantity does Willis Recycling need for an aluminum pickup?
Minimum requirements depend on your location, material type, and whether aluminum is part of a mixed load with other scrap metals. Call (916) 271-2691 to discuss your specific situation and determine what makes sense for your operation.
Can painted or coated aluminum be recycled?
Yes. Painted and coated aluminum maintains recyclability. The coating affects categorization and processing requirements, which is why keeping coated material separate from bare aluminum matters for your evaluation. Coatings get removed during recycling processing rather than by the generator.
Taking the Next Step
If your California business generates aluminum scrap—whether from manufacturing, construction, HVAC work, or facility operations—proper separation practices improve your position when it's time for pickup.
Start with an honest assessment of what your operation actually generates. Set up separation categories that match your reality. Brief your team on the basics.
Ready to discuss your aluminum recycling needs? Call Willis Recycling at (916) 271-2691 to talk through your situation and schedule an on-site evaluation.
About Willis Recycling
Willis Recycling is a family-owned mobile recycling service based in Sacramento, serving businesses throughout Northern California and the Central Valley. With nearly two decades of industry experience, we provide on-site scrap metal and cardboard pickup for commercial operations including construction firms, manufacturing facilities, auto shops, and healthcare organizations. Our team handles the logistics, provides transparent documentation, and follows all regulatory requirements including ID-verified intake [1].
Works Cited
[1] Willis Recycling — "Mobile Recycling Services." https://www.willisrecycling.com/mobile-recycling/
[2] Willis Recycling — "Commercial Scrap Metal Pickup Sacramento." https://www.willisrecycling.com/commercial-scrap-metal-pickup-sacramento/
[3] Institute of Scrap Recycling Industries (ISRI) — "Scrap Specifications Circular." https://www.isri.org/recycling-commodities/scrap-specifications-circular



